产品展示

当前位置:首页 > 产品中心 > > 三相高压栅极驱动器--PN7336

方案中心 公司新闻 产品中心 合作伙伴 联系我们

联系我们

全国咨询热线:400-788-7770

销 售 电 话: 86 0757-28301898

手 机 :18923224605

邮 箱 :gdm1@ctc-semi.com

Q Q :3070971984

传 真 :0757-28317760

佛 山 地 址:佛山市顺德区容桂街道办事处合安街19号

推荐产品

  • MOSFET场效应晶体管-SVF12N60F
  • MOSFET场效应晶体管-SVF10N60F
  • MOSFET场效应晶体管-SVF8N60F
  • MOSFET场效应晶体管-SVF7N60F
  • MOSFET场效应晶体管-SVF4N60F
  • MOSFET场效应晶体管-SVF2N60F
三相高压栅极驱动器--PN7336
左滚动
  • 三相高压栅极驱动器--PN7336
右滚动
  • 三相高压栅极驱动器--PN7336
  • 型号:PN7336
  • The PN7336 is a high voltage, high speed power MOSFET and IGBT drivers with a three independent high and low side referenced output channels for 3-phase applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600V. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an over-current or under-voltage shutdown has occurred. Over-current fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications.
咨询热线:400-788-7770
   

产品介绍

                                                    三相高压栅极驱动器--PN7336

 一 概述

The PN7336 is a high voltage, high speed power MOSFET and IGBT drivers with a three independent high and low side referenced output channels for 3-phase applications. The floating channels can be used to drive N-channel power MOSFETs or IGBTs in the high side configuration which operates up to 600V. Logic inputs are compatible with CMOS or LSTTL outputs, down to 3.3V logic. A current trip function which terminates all six outputs can be derived from an external current sense resistor. An enable function is available to terminate all six outputs simultaneously. An open-drain FAULT signal is provided to indicate that an over-current or under-voltage shutdown has occurred. Over-current fault conditions are cleared automatically after a delay programmed externally via an RC network connected to the RCIN input. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are  matched to simplify use in high frequency applications.


二 产品特征

* Fully operational to +600 V
* 3.3 V logic compatible
* dV/dt Immunity ±50 V/nsec
* Floating channel designed for bootstrap operation
* Gate drive supply range from 10 V to 20 V
* UVLO for all channels
* Cross-conduction prevention logic
* Over-current shutdown turns off all six drivers
* Externally programmable delay for automatic fault clear
* Independent 3 half-bridge drivers
* - 7V negative Vs ability
* Matched propagation delay for all channels




三 应用领域

* Motor Control
* Air Conditioners/ Washing Machines
* General Purpose Inverters
* Micro/Mini Inverter Drives




四 封装




五 应用电路图